Products for Adhesives used in Transportation (Curing Agents & Hardeners)
| Product Name & Description | Category | Type | AHEW Based on solids (g/eg) | Viscosity @25°C (mPa.s) | Pot Life Min. | Ref. Resin | Regional Availability
APAC - Asia, Pacific
EMEAI - Europe, Middle East, Africa, India LAA - Latin America Area NAA - North America Area |
Footnote |
|---|---|---|---|---|---|---|---|---|
|
D.E.H.™ 1450
Excellent adhesion on critical (badly prepared or wet/humid) substrates. Contains Alkyl phenol |
Curing Agents and Hardeners | Modified Polyamide Curing Agent | 115 | 600 – 1,400 | 60 | D.E.R. 331 | APAC, EMEAI, LAA | – |
|
D.E.H.™ 1911
Low emission curing agent particularly suited for the development of primers whenever the substrate is wet or difficult to adhere to. |
Curing Agents and Hardeners | Modified Polyamide Curing Agent | 115 | 1,100 – 1,700 | 70 | D.E.R. 3531 | EMEAI, LAA | – |
|
D.E.H.™ 20
Short pot-life curing agent on basis of diethylenetriamine (DETA). |
Curing Agents and Hardeners | (Modified-) Amine Curing Agent | 21 | 4 – 8 | 25 | D.E.R. 331 | APAC, LAA, NAA | – |
|
D.E.H.™ 2102
Recommended for mineral castings or heavy-filled mortars. Offers low exothermic reaction and give high heat resistance. |
Curing Agents and Hardeners | (Modified-) Amine Curing Agent | 41 | 8 – 18 | 125 | D.E.R. 3272 | EMEAI | – |
|
D.E.H.™ 2112
Recommended system, with D.E.R. 3271 epoxy resin for mineral castings or heavy-filled mortars. Offers low exotherm and give high heat resistance. |
Curing Agents and Hardeners | (Modified-) Amine Curing Agent | 45 | 8 – 18 | 26 | D.E.R. 3271 | EMEAI | – |
|
D.E.H.™ 2132
Very slow, low exotherm curing agent for mineral castings, composites and highly filler mortars. |
Curing Agents and Hardeners | (Modified-) Amine Curing Agent | 45 | 5 – 25 | >120 | D.E.R. 331 | EMEAI | – |
|
D.E.H.™ 24
Short pot-life curing agent on basis of triethylenetetramine (TETA). |
Curing Agents and Hardeners | (Modified-) Amine Curing Agent | 24 | 19.5 – 22.5 | 25 | D.E.R. 331 | APAC, LAA, NAA | – |
|
D.E.H.™ 26
Similar to D.E.H. 24 Epoxy Curing Agent in application, it provides lower vapor hazard to workers due to its higher boiling point. |
Curing Agents and Hardeners | (Modified-) Amine Curing Agent | 27 | 50 – 60 | 27 | D.E.R. 331 | LAA, NAA | – |
|
D.E.H.™ 29
Economical mixture of linear, branched, and cyclic ethylene amines that offers higher flexibility and peel strength in applications where color is not a limitation. |
Curing Agents and Hardeners | (Modified-) Amine Curing Agent | 29 | 200 – 300 | 24 | D.E.R. 331 | APAC, LAA, NAA | – |
|
D.E.H.™ 2955
Offers very rapid curing and is highly suitable for anchoring systems or as accelerator. Suitable for primers if curing is required at temperatures down to -5°C. |
Curing Agents and Hardeners | (Modified-) Amine Curing Agent | 82 | 1,400 – 1,700 | 6 | D.E.R. 3581 | EMEAI | – |
|
D.E.H.™ 35
Tertiary amine accelerator based on 2,4,6-tris-(N,N-Dimethyl-aminomethyl)-Phenol. Suitable as accelerator in low temperarure curing systems or other for non-decorative epoxy applications (primers, mortars, composites,….). |
Curing Agents and Hardeners | – | NA | 100 – 300 | NA | NA | EMEAI | – |
|
D.E.H.™ 39
Fast curing amine hardener based on amino-ethyl piperazine. Mostly used as accelerator for other curing agent. |
Curing Agents and Hardeners | (Modified-) Amine Curing Agent | 43 | 10 – 15 | 27 | D.E.R. 331 | LAA, NAA | – |
|
D.E.H.™ 52
Viscous, room temperature curing agent that has a short pot life and convenient handling and mixing rates with liquid epoxy resins. |
Curing Agents and Hardeners | – | 42 – 47 | 5,000 – 7,500 | 18 | D.E.R. 331 | LAA, NAA | – |
|
D.E.H.™ 58
Room-temperature, low viscosity curing agent that is extremely reactive with liquid epoxy resins. |
Curing Agents and Hardeners | (Modified-) Amine Curing Agent | 28 – 32 | 85 – 130 | 15 | D.E.R. 331 | LAA, NAA | – |